Close
STK-590 Radar Level Gauge
Product Description
590 Radar Level Gauge delivers ±0.5 mm (0.020 in.) instrument accuracy, reducing level measurement uncertainty to a minimum. It enhances your storage operation by providing certified custody transfer accuracy, better inventory management and reliable loss control data.
590 is normally combined with high precision multi-spot temperature sensors for highest accuracy API standard net volume calculations.
Get highest certified custody transfer accuracy for precise asset management of bulk liquid storage.
Achieve higher safety with third party certified IEC 61508 SIL 2 or SIL 3 capability.
Use one tank opening to install the 2-in-1 gauge for either redundant level measurements or to achieve independent safety and level measurement systems.
Benefit from convenient and safe installation with two-wire IS bus power supply.
Include wired and/or wireless data transmission.
Measure in all bulk storage tank types and products, ranging from liquefied gases, light products, crude oil and bitumen.
Accuracy :± 0.5 mm (± 0.020 in.).
Stability :Typically < ± 0.5 mm (0.020 in.) in -40 to +70 °C (-40 to +158 °F).
Update Rate: New measurement every 0.3 second.
Communication Protocol :Foundation™ Fieldbus for connection to Rosemount 2410 with self-configuring Tankbus or any Foundation™ Fieldbus host system.
A Rosemount 5900 level gauge in combination with a 2410 Tank Hub enables wireless communication and emulation of gauges from other manufacturers.
Custody Transfer Approval: OIML R85:2008, and national certifications such as PTB, NMi etc.
Safety : SIL 2 and SIL 3 certified.
• TÜV tested and WHG approved for overfill prevention.
Metrology Sealing : Yes.
Emulation Capability : Possible to integrate with legacy tank gauging systems.
Supports emulation of other vendors’ communication protocols: E.g. Enraf, L&J Tankway, Varec Mark/Space, Whessoe, GPE, Sakura and Tokyo Keiso.
Power Supply : • FISCO: 9.0 - 17.5 VDC polarity insensitive (for example from 2410 Tank Hub).
• Entity: 9.0 - 30.0 VDC polarity insensitive.
Ambient Temperature : -40 to +70 °C (-40 to +158 °F). Minimum start-up temperature is -50 °C (-58 °F).
Antenna Type : Parabolic antenna, still-pipe array antenna, horn antenna, LPG/LNG antenna.
Stability :Typically < ± 0.5 mm (0.020 in.) in -40 to +70 °C (-40 to +158 °F).
Update Rate: New measurement every 0.3 second.
Communication Protocol :Foundation™ Fieldbus for connection to Rosemount 2410 with self-configuring Tankbus or any Foundation™ Fieldbus host system.
A Rosemount 5900 level gauge in combination with a 2410 Tank Hub enables wireless communication and emulation of gauges from other manufacturers.
Custody Transfer Approval: OIML R85:2008, and national certifications such as PTB, NMi etc.
Safety : SIL 2 and SIL 3 certified.
• TÜV tested and WHG approved for overfill prevention.
Metrology Sealing : Yes.
Emulation Capability : Possible to integrate with legacy tank gauging systems.
Supports emulation of other vendors’ communication protocols: E.g. Enraf, L&J Tankway, Varec Mark/Space, Whessoe, GPE, Sakura and Tokyo Keiso.
Power Supply : • FISCO: 9.0 - 17.5 VDC polarity insensitive (for example from 2410 Tank Hub).
• Entity: 9.0 - 30.0 VDC polarity insensitive.
Ambient Temperature : -40 to +70 °C (-40 to +158 °F). Minimum start-up temperature is -50 °C (-58 °F).
Antenna Type : Parabolic antenna, still-pipe array antenna, horn antenna, LPG/LNG antenna.
